www.the351cforum.com
http://the351cforum.com/

351c Adjustable Timing Pointers?
http://the351cforum.com/viewtopic.php?f=3&t=1309
Page 1 of 1

Author:  div1racer [ Fri Dec 27, 2019 5:30 pm ]
Post subject:  351c Adjustable Timing Pointers?

I'm looking for an adjustable timing pointer, so far I found one by 'Unleashed Customs' and one by Proflow in Australia https://www.proflow.com.au/ford-clevela ... ng-pointer . It looks like the Unleashed/Milodon pointer is held on by one bolt and Proflow does not have any US distributors? Are there any other options out there?

Thanks, Div1Racer.

Author:  blykins [ Fri Dec 27, 2019 6:35 pm ]
Post subject:  Re: 351c Adjustable Timing Pointers?

I just use a factory pointer and timing tape if I need to adjust it.

Author:  DaveMcLain [ Tue Dec 31, 2019 8:23 pm ]
Post subject:  Re: 351c Adjustable Timing Pointers?

I don't know of anyone who makes an adjustable pointer for the Cleveland but it would be nice because they seem to never be correct. Most of the time I use the stock pointer and then either weld it up or grind it off to make it right. I have an engine at the shop right now where the customer bought a fancy "billet" pointer and was it on the money? NO!

Author:  div1racer [ Tue Dec 31, 2019 8:33 pm ]
Post subject:  Re: 351c Adjustable Timing Pointers?

Here's the one from Unleased that is also sold by Milodon and others. http://stores.unleashedcustommachining. ... g-pointer/

Div1Racer

Author:  DaveMcLain [ Wed Jan 01, 2020 10:04 am ]
Post subject:  Re: 351c Adjustable Timing Pointers?

div1racer wrote:
Here's the one from Unleased that is also sold by Milodon and others. http://stores.unleashedcustommachining. ... g-pointer/

Div1Racer


I didn't know that piece existed that looks cool thanks for sharing.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/